MH Single girder Gantry Crane Design Features
Our company produce gantry crane series with electric hoist mainly with the lifting capacity of 3-16t, span 12-30m, the lifting height of 12-30m, and the light (A3/A4) working duty, also can design and manufacture non-standard series hoist according to your demands.
- Equipped with CD1 MD1 etc. electric traveling hoist.
- Widely used in docks, freight yards, warehouses, construction sites and other open space.
- Prohibited to use in the flammable, explosive, corrosive media environment.
MH Single girder Gantry Crane Application
This gantry crane is used in ambient temperature of -25℃～+40℃，humidity≤85%，elevation under 1000m; the average temperature does not exceed +35℃ within 24 hours, when the average temperature exceeds +25℃, relative humidity allowed temporarily up to 100% within 24 hours, in the temperature of +40℃, relative humidity not more than 50%.suitable power supply is 3-ph, 380V, 50HZ (can change as user demand).
Note: Overhead crane with electric hoist with the capacity 5t and span 15m, can be signed as MH5t-15m.
MH Single girder Gantry Crane Structural Design Drawings
Parameters of MH Single girder Gantry Crane
MH Single girder Gantry Crane Technical Standard
Our company carry out the contract equipment design, manufacturing, testing according to the following standards, procedures and corresponding provisions. In the following standards, we give priority to the national standard and (former) Ministry of Machinery Standard.
- GB / T 3811-2008 “Design Rules for Cranes”
- GB of 6067-1985 “Crane Safety Regulations”
- JB / T 5663-2008 “Electric Hoist Gantry Crane”
- JB / T 9008-2004 “Wire Rope Electric Hoist”
- GB 5905-1986 “Crane Electric Control Equipment”
没有评论:
发表评论