What is 2 ton overhead crane

 

2 Ton Overhead Crane

The design and manufacture of the LD type 2-ton electric single-girder crane are carried out in accordance with the relevant standards such as GB3811-2008 “Crane Design Specification” and JBT1306-2008 “Electric Single-beam Crane”. It is used together with the electric hoist in the form of CD1 and MD1 (the mold factory can be matched with the electric chain hoist) to become a light-duty crane with rail operation. ℃ range. LDA type electric single-beam crane is a general-purpose crane, which is mostly used for transporting materials and installing and maintaining equipment in fixed spans such as workshops, warehouses, and stockyards in light and small operation industries such as machinery manufacturing workshops, petroleum, petrochemical, building materials, and electronics.

• Advantages: compact size, low building headroom, light weight, small wheel pressure, short order cycle, economical, etc.
• Disadvantages: The effective lifting height is relatively low, the shaking in use is relatively large, the work level is low, and it is not suitable for heavy workshops.

 How to choose the right 2 ton overhead crane

There are many types of 2-ton overhead cranes, which can be divided into general overhead cranes, explosion-proof overhead cranes, metallurgical overhead cranes, grab overhead cranes, casting overhead cranes, insulating overhead cranes, and electromagnetic overhead cranes according to application scenarios. No two 2-ton overhead cranes in the world are exactly the same. We will design targeted overhead cranes according to the application scenarios of the cranes and some special requirements of customers. Therefore, on the question of how to choose a 2-ton overhead crane, our advice to customers is to figure out what they need the crane to do and what they can do on the one hand, and communicate with the crane supplier on the other hand, which will help you get Professional advice.

Grab crane for Pakistan cement factory

The selection of an overhead crane is determined by many factors, including your required crane specifications (rated load capacity, span, lifting height, etc), specific use, environmental conditions, duty cycle, building or structural requirements, and  other special requirements.

Discuss your 2 ton overhead crane specifications with one of our experts online to get the most appropriate solution for your job.

Parameters of 2 ton overhead crane

Overhead cranes have many parameters, and being familiar with these parameters will help you better understand the crane

Lifting weight

1. Rated lifting weight Gn

Refers to the materials that the crane can lift together with the detachable spreaders or attachments such as grabs, electric

The sum of the masses of magnetic chucks, balance beams, etc.

2. Total lifting weight Gz

Refers to the materials that the crane can lift together with the separable spreaders and long-term fixed in the lifting

On-board spreaders and rigs (including hooks, pulley blocks, hoisting wire ropes and

The sum of the mass of other lifting objects below the lifting trolley).

3. Effective lifting weight Gp

The effective lifting capacity is the net mass of the material that the crane can lift.

Span

1. Span refers to the horizontal distance between the centerlines of the running rails of bridge cranes, and the unit is m. The span of the bridge crane is 1.5-2.0m smaller than that of the workshop (1.5m below 50t).

2. The distance between the centerlines of the trolley running track of the bridge type crane is called the track gauge of the trolley.

3. The distance between the centerlines of the running rails of a jib crane running on the ground is called the gauge of the crane.

Lifting height

1. The vertical distance from the ground to the highest allowable position of the spreader is marked with H.

2. If the hook can be placed below the ground, the height below the ground is called the descending depth (h).

How to customize Overhead Crane from China

We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a Overhead Crane, you can leave a message on the website or email, tell us the following information, and our sales manager will contact you:

• Lifting capacity (ton): __ ?( The rated capacity)
• Lifting height (m):__ ? (Height from hook center to the floor)
• Span (m): __ ? (Distance between rail center)
• Lifting speed (m/min): __ ? ( Single, Dual, Variable)
• Traveling distance (m): __ ? (The length of the rail)
• Work duty: __ ? (How many hours a day? How many times an hour?)
• What material to be lifted: __ ?
• Industrial voltage: __ ? ( like :380V, 50Hz, 3ph )

You can either fill out the contact form or send us an email. After receiving your inquiry, we will contact you as soon as possible and provide you with a suitable offer.

What is 2 ton overhead crane