LD Type 2 Ton Single Girder Bridge Crane Parameter Table

 LD type 2t electric single girder bridge crane (hereinafter referred to as 2t single girder crane) is designed and manufactured according to JB/T1306-94. The 2t electric single girder crane is used together with CD1, MD1 and other forms of electric hoists. It has become a light and small crane with rail operation. The lifting capacity is 2t, and the applicable span is 7.5-22.5m. The working environment temperature is within – 25 -+40 ℃.

Structural drawing of 2t single beam crane

Technical parameters of 2t single beam crane

Crane traveling mechanism	Working speed (m/min)		20 ground	30 ground		Room
	Speed ratio		58.78	39.38		26.36
	Motor	Type	YSE80₂-4	YSE90L-4		7DR100-4
		Power	2×0.8	2×1.5		2×1.5
		Rotational speed (r/min)	1380
Lifting Mechanism (electric hoist)&electric hoist traveling mechanism	Model of electric hoist		MD, type model		CD, type mode
	Lifting speed (m/min)		8/0.8(7/0.7)		8(7)
	Lifting height H (m)		6、9、12、18、24、30
	Traveling speed (m/min)		twenty
	Motor		Cone squirrel cage model
Working class			A3
Electric current			380V  50HZ three-phase
Width of rail			37~70mm

LD Type 2 Ton Single Girder Bridge Crane Parameter Table