Dongqi 5 ton electric wire rope hoist for sale to Thailand customer, is a small sized lifting equipment, which used for oil and gas drilling industry. According to our customer’s request, our engineer recommended our CD type single speed wire rope hoist.
- CD type 5 ton wire rope hoist can be mounted on single beam, bridge crane, gantry crane and jib cranes.
- With slight modification, 5 ton wire rope electric hoist can also be used as a winch.
- Dongqi crane machine 5 ton electric hoist for sale is also widely used in factories, mines, harbors, warehouse, cargo storage areas and shops, essential in raising working efficiency and improving working conditions.
Wire Rope Hoist for Sale to Thailand:
- Type: CD type single speed
- Lifting capacity: 5 ton
- Lifting height: 6 meters
- Power supply: 380V/3-Phase/50Hz
- Lifting speed: 8(8/0.8) M/Min
- Rope(ø): 15MM
- Lifting motor: 7.5KW
- Running motor: 0.8KW
- Application: Oil and Gas Drilling
Dongqi Wire Rope Hoist Design:
Wire rope electric hoist is designed and assembled by several parts: hoisting gear box, hoisting motor with brake, rope drum, electric control panel and traveling trolley. All these units are separately assembled and can be promptly disassembled.
- Motor: Hoist motor is a taper type rotor motor with braking, has bigger torque, so it can be adapted to moving frequently, the Maximum torque is 2.4-3 times than the rated torque.
- Gear box: Hoist gear box has specially treated gears for high wear resistance. Each geared shaft assembly is supported on ball or roller bearings, to ensure smooth, low-friction operation.
- Wire rope: Hoisting ropes comply with the exporting standards. The leading rope taken by the drum does not slip sideways when slack. The factor of safety, on the nominal breaking strength of the rope is six.
- Rope drum: Grooved hoist drum, seamless pipe of adequate length to be wounded in one layer and to provide proper support for the rope to minimize abrasive wear is provided. Drum shaft resolves on ball bearings for ensuring smooth running.
- Electric apparatus controlling system: Model CD1 hoist is composed of the contactor box, controlling switch, cut-off limiter, the working voltage of controlling switch is 380V, 36V or 24V(safety voltage).
- Rope guide: rope guide is in two halves, ensuring easy accessibility. It encircles the Drum completely so that the rope may not uncoil even when the Hoist is in unloaded condition. The rope guides of Dongqi is thickened and dilated, so that it is not easy to be damaged.
- Hook: Hook block is tested to 150 % of full load before assembly. The rope sheaves are fully guarded with protective steel casting. All sheaves rotate on ball bearing the pulley is thicken and dilated than domestic common pulley.
没有评论:
发表评论