10 ton and 20 ton Double Girder Overhead Crane with Grab Bucket for sale to Pakistan

 We have completed 1 bridge crane installation project in Pakistan, which includes 1 set of 10 ton overhead crane and 1 set of 20 ton overhead crane, all models are QZ double girder Grab Bucket Overhead Crane. All crane components are shipped from Qingdao Port in China to Qasim Port in Pakistan by sea after they are produced in the crane factory in China.

10 ton Double Girder EOT with Grab Bucket parameters

• Lifting capacity: 10T
• Lifting height: 15M
• Span: 23M
• 5m³Grab Bucket
• Working class: ISO M7
• Power supply: 415v, 3phase, 50hz
• Cabin control

20 ton Double Girder EOT with Grab Bucket parameters

• Lifting capacity: 20T
• Lifting height: 16M
• Span: 23M
• 5m³Grab Bucket
• Working class: ISO M7
• Power supply: 415v, 3phase, 50hz
• Cabin control

Technical information

Lifting capacity		t	15	20
Lifting height		m	11.5	11.5
Span		m	15.75	15.75
Speed	Trolley traveling	m/min	39.7	39.7
	Crane traveling		71	71
	Lifting		7.9	7.2
Working class		/	ISO M5	ISO M5
Power supply		V/Hz	380v, 3phase, 50hz	380v, 3phase, 50hz
Trolley traveling power		KW	4	4
Crane traveling power			2*6.3	2*6.3
Hoisting power			26	26
Total power			42.6	42.6
Total Crane Weight		t	20.95	22.14
Max crane wheel load		KN	153	153
Protection class		/	H	H
Insulation class		/	IP54	IP54
Working temperature		/	-20℃ ~ +50℃	-20℃ ~ +50℃
Steel		/	Q235B	Q235B
Country of Origin		/	China	China

Note: Recommended Crane Rail Specification (not included in quotation)

Type	Top Width(mm)	Bottom Width(mm)	Height(mm)	Weight(kg/m)
P43	70	114	140	44.65

The double girder grab overhead crane fetching device is a grab bucket that can grab bulk materials. The double girder grab bridge crane has an opening and closing mechanism and a hoisting mechanism, and the grab is suspended on the opening and closing mechanism and the hoisting mechanism with four wire ropes respectively. The opening and closing mechanism drives the grab bucket to close and grab the material. When the bucket mouth is closed, the hoisting mechanism is started immediately, so that the four steel wire ropes are evenly loaded for hoisting work. When unloading, only the opening and closing mechanism is activated, and the bucket mouth is opened immediately to tilt the material. Except for the different lifting mechanism, the rest of the structure of the grab bridge crane is basically the same as that of the hook bridge crane.

Application of double girder grab bridge crane:

1. Double-girder grab bridge cranes are widely used in power plants, freight yards, workshops, docks, coal stations, etc. for the loading and unloading of bulk materials.

2. Double-girder grab cranes are strictly prohibited to be used in flammable and explosive environments. If there are special needs for use, non-standard design can be customized.

3. All mechanisms of the grab bridge crane are operated in the cab, and the directions for entering the platform door of the cab are: end entry, side entry and top entry.

4. The grapple crane is equipped with a grab bucket, and the style and model specification of the grab bucket can be selected according to the needs of use.

5. The opening direction of the grab is parallel and vertical. The grabbing device is a four-rope grab with double drums, which is simple in structure and reliable in operation. The grab can be opened and closed at any height. When the grabbing material particles are less than 100mm, the effect is good and the production efficiency is high. When the grabbed particles are 200mm large, a toothed grab is required.

10 ton and 20 ton Double Girder Overhead Crane with Grab Bucket for sale to Pakistan