We have completed 1 order for a 3 ton overhead crane from Haiti. This is a HD type single girder overhead crane, the main beam adopts Welded box-section beam, mainly use material Q235B carbon structural steel strong and elegant, easy to maintain. Three-layer painting.
Single Girder Overhead Crane parameters
- Lifting capacity=3T
- Lifting height=9.144m (30ft)
- Span=12.192m (40ft)
- 480V 60Hz 3P
- FEM 2M (ISO M5)
- Pendant and remote control
Note:
- Our offer includes supply of complete crane.
- Installation, commissioning & site testing:not included.
- Crane rail and bus bar system are not included. Quotation can be provided upon client’s request.
Technical information
Lifting capacity | t | 3 | ||
Lifting height | m | 9.144 | ||
Span | m | 12.192 | ||
Speed | Cross traveling speed | m/min | 2-20 (inverter control) | |
Crane traveling speed | 2-20 (inverter control) | |||
Lifting speed | 0.8-5.0 (inverter control) | |||
Working class | / | FEM2M (ISO M5) | ||
Power supply | V/Hz/Ph | 480/60/3 | ||
Cross traveling power | KW | 0.37 | ||
Crane traveling power | 2*0.37 | |||
Hoisting power | 3.0 | |||
Total power | 4.11 | |||
Max wheel load | KN | 23.5 | ||
Total weight | Kg | 2350 | ||
Protection class | / | IP54 | ||
Insulation grade | / | F | ||
Ambient temperature | / | -20℃~+40℃ | ||
Anti-collision system | / | Included | ||
Phase protection relays | / | Included | ||
Limit switch | / | Included | ||
Voltage Low Protect device | / | Included | ||
Emergency stop action | / | Included | ||
Ground fault protection | / | Included | ||
Short-circuit protection | / | Included | ||
Over-heating protection | / | Included | ||
Power-off protection | / | Included | ||
Over-current protection | / | Included | ||
Overload protector | / | Included | ||
Top Quality Buffer | / | Included | ||
Cross Power | / | Festoon Cables | ||
Country of Origin | China |
Recommended Crane Rail Specification (not included in the offer)
Type | Top Width(mm) | Bottom Width(mm) | Height(mm) | Weight(kg/m) |
P18 | 40 | 80 | 90 | 18.06 |
Overhead Crane Finished Installation
(The above picture is for reference to crane model only)
QD type hook bridge crane is a general-purpose bridge crane for trolleys. The crane relies on the longitudinal movement along the direction of the supporting track on the driving beam of the workshop, the lateral movement of the trolley and the lifting of the hook to realize the working process. The common lifting capacity is 5 tons-600t , working level A3A4A5-A8. There are three types of bridge crane operation modes: ground control, control room control and remote control for users to choose.
3t European-spec Single Girder Overhead Crane (HD Model) for sale to Haiti
没有评论:
发表评论