Bridge Crane, Eot and overhead crane travelling crane safety

 Safety on  bridge crane, eot crane, and overhead  travelling crane, overhead crane,and  basic operation, crane operator, and crane Signalers, etc., are for your reference. Check Dongqi crane company now to ensure your crane safety.

Overhead crane safety on overhead bridge crane, eot crane, and overhead crane travelling crane basic operation, crane operator, and crane Signalers, etc., are for your reference. Check Dongqi crane safety now to ensure your crane safety.Let us image that if you are a rich-experience sometimes will you have the below thoughts?

• You've carefully thought out all the angles.
• You've done it a thousand times.
•  It comes naturally to you.
• You know what you're doing, it is what you have been trained to do your whole life.
•  Nothing could possibly go wrong, right?

All these ideas are a hurt at work and in order to have a good working condition today we will explain some basics of eot crane safety.
Hope these can help you and protect yourselves from the dangerous.

Basics of eot Crane Safety

1. Know the rated load of the crane

Overhead bridge crane eot crane safety

2. Never allow a coworker between a fixed object and a load

Overhead bridge crane eot crane safety

3. Think before you lift

Overhead bridge crane eot crane safety

 

4. Know your safe working radius

Always ensure that you know the safe travel radius of the eot crane. Contact with electrical sources or other hazards can result in catastrophic consequences.

Overhead bridge crane eot crane safety

5. Dissipate all hazardous energy

Always ensure energy sources are dissipated before initiating any maintenance activity.
Lifting operations are inherently dangerous. Even when proper training is conducted, equipment is properly maintained, employees conduct themselves in a safe manner, and other facets of the safety program are conscientiously attended to, accidents can still occur.
The reason is that eot crane operations are primarily dependant on mechanical devices. These devices can and do fail. When this happens during a lifting event the results can be catastrophic. You are the only controlling influence that can minimize the hazard. Your life literally is in your own hands!

Safe practices for operators:

1. Test all electric hoist controls and brakes at the beginning of each shift.
2. Never attempt to operate an eot crane or hoist that is suspected to be unsafe.
3. Always test brakes by a short lift to ensure control.
4. Move loads only after being signaled by the designated, qualified signaler.
5. Never carry loads over workers.
6. Never carry loads past workers (they must yield right of way).
7. Signalers must keep line-of-sight with the operator.
8. Never allow riders on loads or hooks.
9. Never allow unauthorized persons to operate eot cranes.
10. Always lockout before maintenance or repairing cranes.
11. Frequently inspect cranes exposed to adverse conditions.
12. Always position the hook directly over the load before lifting the load off of the floor.
13. Document and maintain inspection records.
14. Check warning devices and signals before use.
15. Signalers must watch the load.
16. Operators must watch the signalers.
17. Know your travel path in advance of the lift!
18. Know where you're going to set the load down!
19. Will the new location support the weight?

Link:Bridge Crane, Eot and overhead crane travelling crane safety