3 ton overhead crane for sale for existing workshop of our Thailand customer. 3 ton overhead crane solution by Dongqi engineers depending on Thailand workshop drawing and workshop real site. Dongqi Group crane machine supplies you not only high quality overhead crane and gantry crane but also crane design and crane installation service.
3 Ton Overhead Crane Specification
- Overhead crane
- Lifting capacity: 3 ton
- Span: 24m
- Lifting height: 4.29m
DQCRANE supply scope: crane with hoist, runway beams, crane rails, power lines and brackets, engineer overseas installation and commissioning service.
Overhead Crane Workshop Real Site of Thailand Customer
DQCRANE met the Thailand client at the Canton Fair, and the contract was signed at the Fair, too. Below is one cheerful photo together with our Thailand client:
The overhead crane workshop of Thailand client is an old one, below is the workshop real site of client:
It is an existing workshop with concrete columns while without brackets and runway beams for crane, most old warehouse or workshop are not equipped with necessary brackets when they were constructed, which will lead to complicated work when they want to install cranes on. This workshop is over 20 years, before we design 3 ton overhead crane solutions for our customers, we need to know the columns dimensions and inside rebar quantities, model to confirm the columns are strength enough to support the cranes, this is the first most important information client need to supply, because the first target of DQCRANE is to ensure the safety of supplied cranes, which is responsible for client.
Below is the information about 3 ton workshop crane that client need:
After studying the general layout, DQCRANE found that there is limit height of workshop and if we want to achieve the effective lifting height that client required, we need to equip the low headroom electric hoist on the overhead crane, regardless of the site distributions, DQCRAEN finally confirm the lifting height with the low headroom electric hoist, the technical design is as below:
It is the design with box girder and low headroom electric wire rope hoist, this overhead crane design is now most popular among clients, because from the cost, it is lower than European type overhead crane, but the girder is European girder, which is more stable and less noise comparing with I beam girder.
Low headroom electric hoist can make full use of workshop space, which can perfectly mounted on the box girder.
After confirm the columns information, the second important information is the distance between each two columns, client sent the below layout:
This layout is very clear and much helpful for our engineers to design solutions. According to the above information, our engineer sent a general distribution design of columns, brackets with cranes on.
DQCRANE are willing to send crane solutions for all workshops, no matter new workshop or old warehouse, if the information is clear enough, DQCRANE technical teams will supply a satisfied crane solution.
At the same time, DQCRANE suggest the brackets construction should be considered into the workshop constructions, especially concrete made workshops.
At last, DQCRANE suggest below several crane solutions for some workshops that have limit height:
First one is the mentioned overhead crane type box girder with low headroom electric wire rope hoist
Second one is another type LDP model Overhead crane
Third one is European style overhead crane
Overhead Crane and Gantry Crane Manufacturer in Canton Fair
Each year, DQCRANE will attend two sessions Canton Fair, during the period, there are many favorable promotions, including discounts. These promotions only valid during Canton Fair, many of our new and old clients will go to our booth to have a face to face negotiation chance, in such condition, clients can get a desired price, DQCRANE can achieve a good sales performance;
Also our Canton Fair Teams on site: we are expecting to meet you next time.
没有评论:
发表评论