Workstation cranes are used to help workers perform tasks with higher efficiency and less risk of injury. Workstation cranes enables workers to move objects or loads by pushing the load with the assistance of the vertical lifting device, such as a hoist, or other attachment. Primarily, workstation cranes can be classified into workstation jib crane, bridge crane, and gantry crane, etc.
Advantages of workstation cranes
- Improve efficiency: Workstation crane can empower the worker to transport relatively heavy loads from workstation to workstation with efficiency to improve work production.
- Free your overhead crane for heavier loads or it can be used to supplement of replace multiple jib cranes and or other lifting equipment such as forklifts.
- Workstation crane can be installed flexibility: Freestanding workstation crane can be installed with flexibility, which requires only a standard concrete floor and which also can be relocated when the work flow changes.
- Workstation crane is economical enough to be devoted to individual work stations.
- Increase worker satisfaction and safety.
- Rapid return on investment trough increased productivity.
Workstation Crane configuration
Floor mounted workstation crane
Floor mounted workstation crane diagram
Floor mounted workstation crane features:
- Floor mounted workstation crane is very flexible, which is not attached permanently to your factory and can be relocated when necessary.
- The installation of floor mounted workstation cranes is much easier, which impact stresses to the building roof structurer.
- Enclosed tack design makes the floor mounted workstation crane move much easier than traditional bridge cranes.
- Trussed steel track design makes longer span possible which provides more flexibility in layout.
- Aluminum track lowers bridge weight, making movement easier.
Ceiling mounted workstation crane
Ceiling mounted workstaiton crane diagram
Ceiling mounted workstation crane features:
- Ceiling mounted workstation crane is ideal when the floor space is limited or when the work area must be clear from any support structures which may interfere with operations. However, the ceiling mounted workstation crane requires the building has an adequate overhead structure to support the workstation crane.
- Easy to install, relocate and improve the working efficiency of your workshop.
- Enclosed tack design makes the floor mounted workstation crane move much easier than traditional bridge cranes.
- Trussed steel track design makes longer span possible which provides more flexibility in layout.
- Aluminum track lowers bridge weight, making movement easier.
Monorail workstation crane
Monorail workstation crane
Monorail workstation crane features:
- Monorail workstation crane is equipped with enclosed tracks, which reduces the overall system weight and is easier to move.
- Monorail workstation crane is adaptable which can be operated on any plant floor surface and also can be modified to adjust to the environment with high flexibility.
- Monorail workstation crane is customizable. With customized below hook attachments, end effectors or specialized tools, the monorail workstation crane can be used to handle a diverse variety of loads or objects.
- Lower maintenance costs. Monorail workstation crane of Dongqi Crane is designed and produced with advanced technologies, providing a wide variety of usage and capacity ratings, monorail system and requiring less maintenance.
Free Standing Jib workstation cranes
The free standing jib workstation cranes are designed to service circular areas and support tool balancers, air balancers, vacuum lifters, and hoists. When floor mounted, this type of free standing jib workstation cranes can accommodate up to a 360 degree rotation. Capacities of the jib workstation cranes are available from 100 lbs. to 1000 lbs. with spans up to 16'.
- Most of the free standing jib workstation cranes can be bolted directly to existing floors without adding special foundations
- Features a retaining pin through the pivot pin to help resist accidental upward dislodgement of the boom assembly
- Includes hoist trolley
Free Standing Jib workstation cranes for sale
Wall Cantilever Jib workstation cranes
The wall cantilever jib cranes are designed to service circular areas and support tool balancers, air balancers, vacuum lifters, and electric hoists. When column or wall mounted, the wall cantilever jig cranes can handle up to a 200 degree rotation. Capacities of this type of jib workstation cranes are available from 100 lbs. to 1000 lbs. with spans up to 16'.
- Available in steel (all capacities) or stainless steel (capacities to 500 lbs.)
- Uses enclosed track for the boom assembly, which reduces dead weight for easier rotation than traditional I-Beam Jib Cranes
- Uses tapered roller bearings at the pivot points for unsurpassed ease of rotation.
Wall Cantilever Jib workstation cranes for sale
Tie Rod Jib workstation cranes
The tie rod jib workstation crane has the features such as, light-weight, high strength extruded aluminum enclosed track. This revolutionary track reduces the rotational dead weight of the boom by 56% to 68%, making the jib up to 40% easier to rotate than comparable I-Beam Jib Cranes. The tie rod design minimizes deflection and is more precise when positioning loads than other jib cranes.
- The tie rod jib crane can be mounted to wall or column
- Available in capacities from 150 - 2000 lbs. with spans up to 20'
- Has less deflection for easier load control and positioning
Tie Rod Jib workstation cranes for sale
Workstation crane applications
Workstation cranes can be used to lift, position, and move of large, heavy loads and objects throughout a facility in a variety of industries such as: automotive, chemicals, commercial printing, manufacturing, newspaper, paper, steel, warehousing and distribution, etc.
没有评论:
发表评论