We have completed 1 single girder gantry crane installation project in Australia, which is a 15 ton European-spec Single Girder Gantry Crane, model MHO, from Qingdao, China to Sydney, Australia. The main beam of the gantry crane is a Welded box-section beam, mainly uses material Q235B carbon structural steel strong and elegant, easy to maintain, Three-layer painting, and the hoisting equipment adopts a low headroom hoist. The performance of the low headroom hoist is: Inverter traveling speed and lifting speed, Reducer, drum, motors, Insultation grade, F Protection class IP54.
European-spec Single Girder Gantry Crane Parameters
- Lifting capacity: 15T
- Lifting height: 7M
- Span: 20M
- Power supply: 415v 3phase 50hz
- Pendant control and remote control
- Working class: FEM2M (ISO M5)
Technical Specifications
| Lifting capacity | t | 15 | ||||
| Lifting height | m | 7 | ||||
| Span | 20 | |||||
| Speed | Cross traveling speed | m/min | 2.0~20 (inverter control) | |||
| Crane traveling speed | 2.0~20 (inverter control) | |||||
| Lifting speed | 0.7~4.0 (inverter control) | |||||
| Working class | / | FEM2M (ISO M5) | ||||
| Power supply | V/Hz/P | 415V/50HZ/3P | ||||
| Crane traveling power | KW | 2.2*2 | ||||
| Trolley traveling power | 1.1*2 | |||||
| Lifting power | 13 | |||||
| Total power | 19.6 | |||||
| Max. wheel load | KN | 133.8 | ||||
| Total weight | t | 17.7 | ||||
| Ambient temperature | / | -20℃ ~ +40℃ | ||||
| Anti-collision system | / | Included | ||||
| Phase protection relays | / | Included | ||||
| Limit switch | / | Included | ||||
| Voltage Low Protect device | / | Included | ||||
| Emergency stop action | / | Included | ||||
| Ground fault protection | / | Included | ||||
| Short-circuit protection | / | Included | ||||
| Over-heating protection | / | Included | ||||
| Power-off protection | / | Included | ||||
| Over-current protection | / | Included | ||||
| Overload protector | / | Included | ||||
| Top Quality Buffer | / | Included | ||||
| Country of Origin | China | |||||
Recommended Rail Specification
| Type | Top Width(mm) | Bottom Width(mm) | Height(mm) | Weight(kg/m) |
| P38 | 68 | 114 | 134 | 38.73 |
European-spec Single Girder Gantry Crane Finished Installation
Lifting hoist & Electrics
(The above picture is for reference to crane model only)
In addition to the advantages of ordinary single-beam cranes, European-style single-girder cranes adopt low-headroom design in design concept, which can effectively increase the transportation space, and the unique C-shaped structure increases the hoisting space accordingly. In terms of appearance, it is European-style design, light in weight, and can be programmed to lift the limit to achieve comprehensive protection. In terms of performance, it has stable startup and operation, no impact, good mute effect, and reduced noise pollution; and low failure rate, which can reduce maintenance costs and prolong service life. In the system composition, there is a hard tooth surface reducer, which has high bearing capacity and long service life; semi-grease lubrication and high-strength galvanized anti-rust steel wire rope, maintenance-free; and a three-in-one drive of motor, brake and reduction box
Gantry Crane Processing
Package and Delivery
Product Certifications
Our products have passed CE (ECM) and ISO Certifications, and you can also specify a third-party agency for quality testing. Fees of third-party testing are not included in this offer.
Technical Standards
Design and Construction Rules
All required standards for cranes are the FEM standard, DIN standard and Chinese National standard.
Europe Main National Standards
— 89/392/EEC standard (93/68/EEC)
— 91/368/EEC standard
— 73/23/CEE standard
— “EMC” standard 89/336/EEC
— EN 60204-1
— EN 292 mechanical safety
— ISO 2141
— ISO 2766
International Standards
— June 9, 1993 / Sept. 22, 1993 notice
— July 29, 1992, 92-765, 92-766, 92-767 notice
— DIN 5684
— DIN 15400; DIN 15401
— NFE 26-010
— NFE 26-030
Technical Standards
— FEM 9.511 Mechanical group
— FEM 9.661 Hoisting and traveling components size and quality standard
— FEM 9.671 Wire rope quality standard
— FEM 9.681 Travel motor choice
— FEM 9.682 Hoisting motor choice
— FEM 9.755 Electric hoisting equipment
— FEM 9.811 Electric crane standard
— FEM 9.901 Hoisting components design reference
— IEC 34-1 Traveling and allocation performance
— IEC 34-5 Protection grade standard
— IEC 947-5-1 Low voltage equipment
China Main National Standards
Design rules for cranes GB/T 3811-2008
Safety rules for lifting appliances GB 6067-2010
Common crane technical condition GB 7592-87
Crane-Overhead travelling crane and portal bridge crane
tolerances for manufacture and tracks laying GB/T 10183-2010
Crane-test code and procedures GB/T 5905-2011
General Bridge crane GB/T 14405-2011
Portal Crane GB/T 14406-2011
Crane & Lift Equipment Technical Performance and Acceptance Condition GB/T 17908-1999
Electrical installation and acceptation standard GBJ 232-82
Safety of Machinery – Electrical Equipment of Machines
Part 32: Requirements for hoisting machines GB 5226.2-2002
Electrical installation and acceptance standard GB 50256-96
15 ton European-spec Single Girder Gantry Crane for sale to Australia
没有评论:
发表评论