2021年11月23日星期二

Single-girder cranes need attention

 1. Before operating a single-beam crane, you must check various lifting tools to ensure that the lifting tools are in good condition. If the lifting tools are defective, the lifting crane cannot be carried out.


    2. In the same way that the ropes should be checked for single-girder cranes, it must be confirmed that the ropes are firm, not loose or broken. If you are binding an object with edges, you need to add a protective material between the object and the rope to prevent the rope from breaking.


    3. The single-beam crane needs to pay attention to finding the center of gravity of the heavy object, and the phenomenon of oblique pulling is not allowed. For special lifting objects, the staff needs to operate from the side.


    4. Don't be too hasty when lifting objects, be sure to wait a while, and continue after the goods are stable. It is forbidden to put sundries on top of heavy objects, and no one is allowed to stand on top of them. When lifting, no unrelated persons may pass under the object.


    5. Work safety measures should be perfected. For example, workers should wear hard hats, professional personnel should conduct unified command, and various departments should coordinate their work. When Crane factory objects are off the ground, it is necessary to check whether the steel wire ropes and other components are safe. If it is not safe, shut down for inspection.


    6. Objects that cannot be lifted by using a single beam crane shall not stay in the air for a long time


没有评论:

发表评论